Towbar for Fiat Ducato Motorhome (from 06/2006–) – version with rear-mounted tank

Description

Towbar for Fiat Ducato Motorhome from 06/2006 – wide crossbar version

The MasterHAK towbar for Fiat Ducato motorhomes from 06/2006 in the wide crossbar version has been specifically designed for motorhome chassis with the grey water tank mounted at the end of the frame. The design takes into account the specifics of this conversion and allows safe and correct installation on vehicles with an extended rear overhang.

The product is intended for Fiat Ducato, Citroën Jumper and Peugeot Boxer motorhome versions. The wide crossbar increases overall rigidity and ensures stable load transfer to the vehicle frame, which is particularly important for long rear overhangs.

Depending on the body manufacturer and the routing of components under the vehicle, minor modifications may be required (e.g. adjustment of the grey water drain pipe or other elements).

Key features:

• Wide crossbar version – increased rigidity and mounting stability.

• Designed for motorhomes with the tank at the end of the frame.

• Fixed towball – mounted with two M16 bolts.

• Adjustable mounting height – allows adaptation to different motorhome bodies.

• Dedicated design for motorhome chassis – suitable for long rear overhangs.

• Compatible with 7- and 13-pin wiring (depending on the wiring kit used).

Important information about vertical load

The declared vertical load of 120 kg applies only when towing a trailer.
When fitting non-standard platforms or constructions mounted directly on the towball, significantly higher loads may occur due to different load distribution and leverage effects.

Standard towbar-mounted bicycle carriers can be used, provided that the permissible load limits specified by the vehicle manufacturer, the towbar manufacturer and the carrier manufacturer are not exceeded.

Before ordering, please check:

• Maximum permitted rear overhang: 2530 mm.

• Take a photo of the vehicle frame and attach it to your order to confirm compatibility.

• Check the layout of components under the vehicle (tank, pipes, brackets) – in some cases minor installation adjustments may be required.

Important notes:

• For vehicles without a tank at the end of the frame and without factory preparation, only the MasterHAK towbar with part number 391400 is suitable.

• For vehicles with factory preparation RA030i (identified by a silver label with the RA030i marking on the suspension elements), only the MasterHAK towbar with part number 381400 is suitable.

Using an incorrect towbar version may make installation impossible or result in improper fitment.

Individual kit preparation

Each MasterHAK mounting kit is prepared for a specific vehicle configuration, therefore the lead time may be slightly longer. This ensures the best possible fit for your motorhome conversion.

Ready to travel with full equipment?

The MasterHAK towbar for Fiat Ducato motorhomes from 06/2006 in the wide crossbar version for vehicles with the tank at the end of the frame is a proven solution for towing a trailer, bicycle carrier or transport platform on motorhomes with long rear overhangs.

Order the correct version and be sure the towbar matches your motorhome conversion.
Polish manufacturing quality – precise fitment for motorhome chassis.