MasterSTEP T2 GridStep – rear towbar-mounted step for Fiat Ducato from 06/2006 | 2 × M16

Description

The MasterSTEP T2 GridStep is a steel rear access step for Fiat Ducato vehicles manufactured from June 2006 onwards, designed to fit directly beneath the two-bolt flange-mounted towball. Its open, profiled steel grid surface provides a convenient foothold while reducing the build-up of water, mud, sand and snow.

The step uses the existing towball mounting points. No additional drilling, separate underbody support brackets or modifications to the rear bumper are required.

2 × M16 | 90 mm bolt-hole centres | Ø17 mm mounting holes | open steel grid surface | no drilling | no bumper modifications

For Fiat Ducato from June 2006

The MasterSTEP T2 GridStep is designed for:

• Fiat Ducato from June 2006 onwards
• X250 / X290 / Series 8 / Series 9
• vehicles fitted with a suitable flange-mounted towball

Compatibility depends on the towball mounting arrangement. Before purchasing, please check that the towball is secured using 2 × M16 bolts with 90 mm hole centres.

Mounts directly beneath the towball

The GridStep is fitted beneath the flange-mounted towball, using the existing towbar mounting points.

Mounting specifications:

• flange-mounted towball: 2 × M16
• bolt-hole centres: 90 mm
• step mounting holes: Ø17 mm

There is no need to drill additional holes, install separate brackets underneath the vehicle or modify the rear bumper.

Open steel grid stepping surface

The stepping surface features an open steel grid with profiled edges.

The open design helps prevent water, mud, sand and snow from accumulating. Dirt and debris can pass through the grid rather than remaining on the surface.

A practical solution for commercial vehicles used throughout the year.

Key features of the MasterSTEP T2 GridStep

• for Fiat Ducato from June 2006 onwards
• X250 / X290 / Series 8 / Series 9
• mounts beneath a flange-mounted towball with 2 × M16 bolts
• 90 mm bolt-hole centres
• Ø17 mm mounting holes
• steel construction
• open, profiled grid stepping surface
• improved drainage of water and debris
• no drilling required
• no rear bumper modifications
• no additional underbody support brackets
• colour: black

A simple way to add a rear access step

The MasterSTEP T2 GridStep has one clear purpose: to make access to the rear of the Fiat Ducato easier by using the towbar mounting points already fitted to the vehicle.

It is a practical solution for commercial vans, panel vans, campervans and motorhomes equipped with a suitable type of towbar.

Does your Fiat Ducato have a flange-mounted towball secured by 2 × M16 bolts with 90 mm centres? The GridStep uses this mounting arrangement to provide an additional rear access step.

Looking for a different solution?

We continue to develop the MasterSTEP range based on our own designs and the practical needs of commercial vehicle and motorhome users.

If you need a different rear step configuration, a solution for another vehicle model or a different type of towbar, please get in touch.

Designed and manufactured in Poland.